Initial operation of the device
The flatbed vinyl cutter may only be operated in a clean and dry environment. Place the flatbed
vinyl cutter on a safe, stable surface
● Connect the flatbed vinyl cutter to a 230 V socket using the supplied power cable.
● Connect the vacuum pump to the flatbed vinyl cutter via the three-pin connector.
Furthermore, the vacuum pump needs to be connected to the flatbed vinyl cutter via the
hose.
● Turn the flatbed vinyl cutter on.
Main menu
Press the
Set
key to enter any of the individual menu items. You can exit the defined rotation of
individual menu items at any time by pressing the F2 key, which will automatically return you to the
first menu item, which also represents the online mode.
SPEED/FORCE
Modification of parameters for speed and
contact pressure by means of the arrow keys
for the
creasing tool
SPEED1/FORCE1
Modification of parameters for speed and
contact pressure by means of the arrow keys
for the
cutting tool
CAR X/Y
Distance/offset between knife holder and tool
holder.
Only to be modified by trained staff!
Work mode
● Cut Plotter: Usage of knife and
creasing tool
● Draw Cutter: Usage of the knife
Selectable from within the softwares when
using Drawcut Pro
Baud rate
Standard:38400.
Only to be modified by
trained staff!
XP/YP
Standard 1000:
Only to be modified by
trained staff!
Clear para
Restoring of factory settings
Ver
Firmware version
Secabo GmbH | Hochstatt 6-8 | 85283 Wolnzach | Germany | [email protected] | www.secabo.com
10
