Section 1 – wing fillet installation
step 1
On the fuselage, with an hobby knife open carefully in the covering the holes for wing panel three
pins, wing tube, wing retainer and servo lead.
step 2
Locate the corresponding wing fillet to the wing.
step 3
Locate the wing tube in the fuselage, and carefully slide the wing panel. Make sure the wing panel
alignment pins slide into the holes provided in the fuselage. If necessary sand a little the holes, to let
enter the pins free. Test fit the wing fillet and his alignment.
5
Summary of Contents for KatanaS 120 ARF
