Section 2 – ailerons installation
step 1
Locate the five aileron pin-hinges included in the hardware and trial fit in their place and verify the
correct position and alignment of the aileron with the wing panel.
step 2
Before to glue the hinges, carefully put few drops of oil in the hinge of the pin-hinges.
Locate and glue the five hinges with 5 minutes epoxy, verifying their correct alignment.
step 3
Carefully glue, with 5 minutes epoxy, the hinges into the aileron.
7
Summary of Contents for KatanaS 120 ARF
