step 2
With the hobby knife open the servo bay and the control horn location.
step 3
Place the fibreglass control horn into aileron, check for correct alignment and glue it with some
drops of medium CA.
step 4
Drill the location for the four self-tapping screw using a 1.5mm drill bit and install the servo into
the wing panel as per the picture.
9
Summary of Contents for KatanaS 120 ARF
