SEBA KMT Sebalog GT-3-1, User Manual, Page: 31 / 47

Preparatory work in the office
31
8.6 Saving access data for FTP server and e-mail account in the
SebaDataView-3 software
You must now save the access data for the FTP server used, along with the access
data for the e-mail account you are using, in the SebaDataView-3 software
configuration.
This step is necessary to be able to download measured data from the FTP server and
import it into the SebaDataView-3 software at a later stage. Furthermore, the access
data saved can then be entered in the respective input mask by “clicking the mouse”
when programming the GT-3-1 devices. This makes programming easier and
considerably faster.
Proceed as follows to save access data in the SebaDataView-3 software:
Step Description
1 Open the SebaDataView-3 software.
2
Click on the drop symbol at the upper left of the window.
3
Click on
Settings
in the context menu that opens.
4
Open the
FTP
tab in the configuration.
Result:
The following entry screen then appears in the window:
The FTP settings segment contains input fields for entering the access data for
your FTP server. You can ask your company's system administrator or the
server operator for this data, or look it up in your FTP usage agreement.
The E-mail settings segment contains input fields for entering the access data
for the sender e-mail account to be used when messages are to be sent by
e-mail. Ask your company's system administrator or the e-mail account provider
for this data. You can enter any name or similar designation in the
Sender name
field, and this will be used to identify the device as the sender of the message.
5 Click the respective Use own settings checkbox.
6 Enter the access data in the input boxes.
7 Click on OK to confirm the details and to close the window.
Result: The access data are now on file in the software. When programming the
devices, a checkbox is shown for each of the steps in the input area, and this
can be used to add the access data saved.
Procedure