SEBA KMT Sebalog GT-3-1, User Manual, Page: 15 / 47

Data security
15
4 Data security
4.1 Introduction
Many SebaKMT devices support the following security features:
•
Encryption of the radio communication
•
Encryption of data transfers from / to the FTP server
•
Possibility of assigning a user password for access restriction
The following table shows which devices have the security features Radio Encryption
and Password Protection and which firmware version is at least necessary.
Software / Device Firmware
SebaDataView ≥3.2.0.0
SebaCloud ≥9.0.0
LOG PS-3 ≥2.0.0
LOG D-3 ≥1.05.00
LOG GT-3-1 ≥1.013
LOG GT-3-S ≥1.013
LOG GSM-3-2 ≥1.013
4.2 Data encryption
4.2.1 Encryption of the radio communication
By default, the devices or software applications listed above work with an encryption
protocol for wireless communication. This means that certain user-sensitive data will
only be transmitted encrypted.
These data are subject to encryption:
•
SIM Pin
•
any access data for FTP servers and e-mail accounts
•
any telephone numbers and e-mail addresses
•
any GPS data
•
comment text
These data are not subject to encryption:
•
measurement settings (for example, measurement interval, measurement period,
channel config, etc.)
•
measurement data
These transmission paths are subject to encryption:
•
Radio communication between the computer with SebaDataView-3 software and a
SebaKMT device
•
Radio communication between the PocketServer-3 and a SebaKMT device
Both devices, transmitter and receiver, must at least work with the above-
mentioned firmware version (see table in the previous section). Otherwise, only
unencrypted data transmission is possible.