10
INSTALLATION OF EQUIPMENT
- This equipment shall only be able to be unpacked and installed by a Saevo authorized technician,
under penalty of losing the warranty, as only (s)he has the information, suitable tools and training
required to execute this task.
- Saevo bears no responsibility for damages or accidents caused by poor installation executed by
a technician not authorized by Saevo.
- Only after the equipment has been installed and duly tested by the authorized technician
representing Saevo, will it be ready to start work operations.
The installation of this equipment requires the necessity of specialized technical assistance
(Saevo). Ask for the presence of a Saevo representative technician at the nearest seller,
or through the Saevo Service Center: + 55 (16) 3512-1212.
Moving parts installation
- Put the front support plate (01) into the Sealer, fitting the rip to thes upports (A).
- Fit the operating lever in the vertical position (05), on the sdie of the Sealer (B).
- Connect the Power input cable (04), to the connection behind the Sealer (C).
A
B
C
