14
In order to avoid environmental contamination or undue use of the Equipment after it has become
useless, it should be discarded in the suitable place (as per the local legislation of the country).
Pay attention to the local legislation of the country for the conditions of installation and disposal of
residue.
Precautions to be adopted against foreseeable or uncommon risks, related to
the deactivation and abandoning of equipment
- If the equipment has any abnormality, check if the problem is related to any item listed in the
topic of unforeseen events (failures, causes and solutions). If it is not possible to resolve the
problem, turn off the equipment, remove the power supply cable from the socket and contact your
representative (Saevo).
Precautions in case of alteration in the functioning of equipment
CORRECTIVE AND PREVENTIVE MAINTENANCE AND PRESERVATION
Cleaning
Important: In order to execute cleaning or any type of maintenance, ensure that the equipment is
disconnected from the electrical network.
Additional procedures for reuse
The equipment can be reused in undetermined, i.e. unlimited, quantities, only needing to be cleaned
and disinfected.
Attention
- In order to prevent risks and damages to equipment, make sure that the liquid does not
enter into the equipment.
- To cleaning the equipment, using the damp cloth with a mild soap. The application of
other solvent-based cleaning products or sodium hypochloride isn’t recommended, because
they may damage the equipment.
PRECAUTIONS, RESTRICTIONS AND WARNINGS
Disinfection
- Use clean and soft cloth dampened in alcohol 70% to disinfection of the equipment.
- Never use corrosive disinfectants or solvents.
WARNING
For preventing contamination, use gloves and other protection systems during disinfection.
Even that, during the procedures, gloves are used, after removing gloves the hands must
be washed out.
