3
制作牛奶泡
/ milk frothering
1
． 打开杯盖，如图
1
；
open the cup cover as figure no.1
2
． 将搅拌器插入奶泡机杯体内的转轴里，并要注意搅拌器能顺畅旋转，如图
2
；
Insert the mixing shaft into the spindle of cup, please note it can rotate smoothly, as figure no. 2;
3
． 将牛奶注入奶泡机杯体内；最大容量为
250ML,
最大水位标志为
”MAX”
，当牛奶注入量在
”MAX”
以上时，奶
泡可能会溢出。最小容量为
150ML,
最小水位标志为
”Min”
。如图
3
；
Pull the milk into the cup, max quantity is 25ml according to the “Max” mark, the milk could spill out when
pulling more than 250ml; min quantity is 150ml according to the “Min” mark, as figure no. 3;
4
． 盖上杯盖，如图
4
；
Cover with up cover as figure no.4;
5
． 将杯体插入奶泡机机座上，电源插头插上电源插座，如图
5
；
Put the cup on the power base properly, plug on the power base, as figure no.5;
6
． 按下奶泡机机座上的按键，和是加热按键，是不加热按键，此时指示灯亮，奶泡机开始运作，搅拌器转动，
开始制造牛奶泡；大约
90-240
秒后奶泡机会自动停止，指示灯熄灭，一杯美妙香滑的牛奶泡制造完成。
当你想奶泡机在运作过程中停止使用，你可以重按按键或提起杯体，此时奶泡机就会立即停止工作。
Press the button on the power base,
and are heating buttons,
means no heating. When the light
under the button lighted means it works that is starts mixing and frothing milk. It stops after around 90~240
seconds, the light goes out and the foamed milk’s ready. When you want to stop frothing at any time during the
operation, you can press the button once more or lift up the cup, the milk frother will stop immediately.
制作热巧克力
/ makes hot chocolate
