Main Menu Settings
4
In the main menu of Seatec AIS devices you can edit basic settings, set alarms and show
incoming NMEA data sets.
To access the main menu, press the “Menu” (1) button twice. Now you have access to the
following settings:
Setup
Here you can edit the following settings of your device:
- Adjustment of various units, such as knots and nautical miles
- Time and date configuration
- Turning the simulation modus on/off
- Changing the system language
- Turnung the key sounds on / off
- Restore to factory defaults
Alarm
Under this menu point you have the option to configure different alarms.
Press the “ENT” (4) button to switch an alarm signal on or off.
Anchor Alarm
This lets you set and monitor your position in relation to an anchor point.
Until you leave this point of the distance you set an alarm will be triggered.
Press the “ENT” (4) button to switch an alarm on or off.
Speed Alarm
The speed alarm can be set for speeds that is greater than a certain number
of knots (high) or below a certain number of knots (low).
Timer
Sets a time until an alarm will occure.
Buzzer
You can choose between a short-, long- and constant alarm tone
Warning Message
Here you have the possibility to call a history of all received alarms.
NMEA Data
This feature allows you to show all the NMEA data, which was received via
your external interface.
17
Summary of Contents for AIS6
Page 1: ...User Manual AIS6 MFR6...
