Seat Alhambra 2019, Owner'S Manual

Page: 53 / 380

Self-help
Note
●
The vehicles must not touch each other,
otherwise electricity could flow as soon as
the positive terminals are connected.
●
The discharged battery must be properly
connected to the on-board network.
Positive pole at the jump start
points
Fig. 53
In the engine compartment: jump start
positive pole
+
.
On some vehicles, there is a starting assis-
tance terminal in the engine compartment,
under a labelled cover.
Jump start: description
Fig. 54 Diagram of connections for vehicles
without Start Stop system
Fig. 55
Diagram of connections for vehicles
with Start Stop system
Jump lead terminal connections
Switch off the ignition of both vehicles
›››
.
1.
Connect one end of the red jump lead to
the positive
+
terminal of the vehicle
with the flat battery
A
›››
Fig. 54 .
Connect the other end of the red jump
lead to the positive terminal
+
in the ve-
hicle providing assistance
B
.
In vehicles without a Start-Stop system:
connect one end of the black jump lead
to the negative terminal
–
of the vehicle
providing the current
B
›››
Fig. 54 .
In vehicles with a Start-stop system:
connect one end of the black jump lead
X
to a suitable ground terminal, to a sol-
id piece of metal in the engine block, or
to the engine block itself
›››
Fig. 55 .
Connect the other end of the black jump
lead
X
to a solid metal component bol-
ted to the engine block or to the engine
block itself of the vehicle with the flat
battery. Do not connect it to a point near
the battery
A
.
Position the leads in such a way that
they cannot come into contact with any
moving parts in the engine compart-
ment.
Starting
Start the engine of the vehicle with the
boosting battery and let it run at idling
speed.
»
2.
3.
4a.
4b.
5.
6.
7.
51