Seat Alhambra 2019, Owner'S Manual

Page: 290 / 380

Driving
●
The sensors may not always be able to
detect objects such as trailer draw bars,
thin rails, fences, posts and trees, etc. This
could result in damage to your car.
● Although the parking distance warning
system detects and warns of the presence
of an obstacle, the obstacle could disap-
pear from the measurement angle of the
sensors if it is too high or low and the sys-
tem would no longer show it. Therefore, it
will not warn you of these objects. Ignoring
the warnings of the parking sensor system
could cause considerable damage to the
vehicle. This is also valid when using the
park assist (e.g. to park behind a truck or
motorcycle). Therefore, always keep a
close watch on the area in front of and be-
hind the vehicle while parking, and inter-
vene promptly if necessary.
●
To ensure that the system works properly,
the bumper sensors must be kept clean,
free of ice and snow and uncovered.
● The bumper sensors may become dam-
aged or misaligned, for example, when
parking.
●
When cleaning the sensors with high-
pressure or steam cleaning equipment,
spray the sensors briefly at a distance of
no less than 10 cm.
Note
If there is a fault in the system, go to a spe-
cialised workshop. SEAT recommends tak-
ing your car in for technical service.
Parking using the park assist sys-
tem
Fig. 268
Detailed view of the centre console:
button to switch the park assist system on man-
ually.
Fig. 269
Space detected: parallel or angle.
Parking preparations
●
The Traction control system ASR must be
turned on
›››
page 281 .
● In parallel parking: press the

›››
Fig. 268 button as many times as neces-
sary to select the desired parking mode.
When the function is enabled, the lamp but-
ton will light up.
288