Seat Alhambra 2019, Owner'S Manual, Page: 144 / 380

Operation
● Push the headrest down as far as it will go
›››
page 11 .
●
Remove objects from the footwell in front of
and behind the rear seat
›››
.
●
Remove objects from the space below the
rear seat.
●
Remove the attachment elements and sup-
ports for the net from the rail system.
●
Pull lever
›››
Fig. 144
1
back and fold the
seat backrest forwards. The rear seat folds
forward
›››
and the cushion also moves for-
ward.
●
Fold the seat tray forward on top of the fol-
ded seat.
● When the seat is folded down, no adults or
children should travel in it
›››
.
Putting the seats in the second row back in
place
●
Pull lever
›››
Fig. 143
1
upwards and place
the seat backrests in vertical position. The
entire seat folds backwards.
●
Pull on the rear seats and the seat backrest
to ensure that they are correctly locked in
place and that the seat belt protection is
guaranteed for rear seat passengers.
Putting the seats in the third row back in
place
●
Open the rear lid.
● Pull on the handle
›››
Fig. 144
2
to put the
seat tray back in position.
●
Pull the handle
›››
Fig. 144
3
. The entire
seat folds backwards.
●
Press on the seat tray in the seat backrest
until it is held in position by its magnets.
●
Open the sliding door.
●
Put the seat backrest into position and
press firmly until it clicks into place.
●
Pull on the rear seats and the seat backrest
to ensure that they are correctly locked in
place and that the seat belt protection is
guaranteed for rear seat passengers.
WARNING
Folding and lifting the rear seats carelessly
without paying attention could cause seri-
ous injury.
●
Never fold or lift the seats while driving.
●
Do no trap or damage seat belts when
raising the seat backrest.
●
Keep your hands, fingers, feet and other
body parts out of the hinges and the seat
locking mechanism when folding and un-
folding.
●
Mats or other objects can be caught in
the hinges of the seat backrests or rear
seat. This could prevent the seat or seat
backrest from locking securely in the verti-
cal position.
●
All seat backrests must engage correctly
for the seat belts on the rear seats to work
properly. When the seat backrest of an oc-
cupied seat is not correctly locked in place,
the passenger can be thrust forward with
the seat backrest in case of sudden brak-
ing, sudden manoeuvres or an accident.
●
No seat must be occupied if the seat
backrest or seat is folded or not correctly
engaged.
CAUTION
● Before folding the rear seat backrest, ad-
just the front seats so that neither the
headrest or backrest hit them when folded.
●
Objects placed in the footrest area in
front of and behind the rear seats can be
damaged when seats are folded down or
put back into position. Remove any objects
in the way before folding seats down or re-
positioning them.
●
Objects placed in the moulding on the
back of the third row of seats can be dam-
aged when folding down the seats or put-
ting them back into position. Remove any
objects in the way before folding seats
down or repositioning them.
●
The attachment elements and supports
for the net partition placed on the rail sys-
tem can be damaged when folding down
seats from the third row or putting them
back into position and these can also dam-
age the seats themselves. Before folding
142