Seat Alhambra 2019, Owner'S Manual

Page: 135 / 380

Seats and headrests
Fig. 134
Fitting the headrests in the second or
third row of seats
Removing and fitting the front headrests
without longitudinal adjustment
●
Push the headrest up as far as it will go
›››
in Introduction on page 131 .
●
Pull out the headrest by pressing the button
completely
›››
Fig. 133

1
.
●
To refit, insert the headrest into the holes in
the backrest, pushing it down until it engages,
while pressing button
1
.
Removing and fitting the front headrests
with longitudinal adjustment
●
Push the headrest up and backward as far
as it will go
›››
in Introduction on
page 131 .
●
Place a flat object, e.g. a plastic card
›››
Fig. 133
 2
, on both sides between the
seat backrest cover and the end protector of
the seat backrest retaining bar and unlock
the retaining bars with a little pressure.
●
Completely pull out the headrest.
●
When re-fitting, pull out the headrest's two
retaining bars as far as possible and insert
them into the holes in the seat back. Push
downwards until the two bars click into place.
Removing the rear headrests
●
If necessary, adjust the backrest of the seat
so the headrest can be removed.
● Push the headrest up as far as it will go
›››
in Introduction on page 131 .
●
Remove the headrest completely while
pressing button
›››
Fig. 134
1
.
Fitting the rear headrests
●
Unlock the rear seat backrest and fold it
forward slightly
›››
page 130 .
●
Place the headrest in the correct position
on the guides of the corresponding backrest
and insert it.
● Lower the headrest while pressing button
1
.
●
Raise the rear seat backrest and lock it.
WARNING
Remove the rear headrests only when it is
necessary to fit a child seat. After removing
a child seat, refit the headrest immediately.
Seat functions
Lumbar massage function*
Fig. 135
On the side of the front seat: button
for the lumbar massage function.
During the massage operation, the lumbar
support will move in a way that massages the
lumbar area of the back. While it is operating,
the arch of the lumbar support can be adjus-
ted using the corresponding control based on
your personal preferences
›››
page 11 .
Connection
●
Press the

button in the control panel of
the seat.
Disconnection
●
Press the

button again in the control
panel of the seat.
»
133