3000LRS DGPS RECEIVER
OPERATOR’S MANUAL
A Product of the Fugro Group of Companies
Issue 2.00 JUNE 2003
B11203400PMBRA0 / 7
Uplink Channel Confirmation
All menus can be accessed utilising the menu selector buttons on the front right
hand side of the unit. Refer to the Menu Structure description for a full list of all
menus within the 3000LRS unit (see page 13).
The arrow buttons will assist in navigating through the menus
with the central circular button inputting any user changes to the
unit
If when powering on your 3000LRS unit with the antenna connected the unit does
not advance passed the ‘synchronising’ mode in the Boot Up Sequence, then
confirm that the unit is operating on the correct satellite channel.
To confirm 3000LRS operating channel:
With the main menu displayed (as shown)
the unit will be constantly doing a loop of
‘Freq Search’
‘Synchronising’
‘Freq Search’
Press
until Channel Selection
main menu is displayed
Press until uplink name is seen
If this is the incorrect uplink then complete
the following procedures to change uplink:
Press until required uplink is seen
Press to input selection
The unit will now initialise the search function.
(see Boot Up Sequence on page2)