3000LRS DGPS RECEIVER
OPERATOR’S MANUAL
A Product of the Fugro Group of Companies
Issue 2.00 JUNE 2003
B11203400PMBRA0 / 6
Boot up Sequence
Note: If the mode doesn’t advance to “RECV”, first check that the correct
satellite is being tracked in the ‘Channel Selection’ menu (see page 3) for
the unit’s location.
Refer to Appendix D for a diagram of satellite footprint coverage
Each unit is configured to the customer’s specification during ordering. It
is therefore expected that the unit will display the RECV screen within 20
seconds of powering on with antenna connected.
On initial power on screen displays:
Model name and type
Firmware version
The unit’s serial number will then be
indicated
The unit will now search for an
uplink
Unit locks onto uplink
signal. Reading should be
3-8 bars