3000LRS DGPS RECEIVER
OPERATOR’S MANUAL
A Product of the Fugro Group of Companies
Issue 2.00 JUNE 2003
B11203400PMBRA0 / 14
Menu System
Current Readings
1.
Power
A Power indication in –dbm of the signal power. Normally
when receiving this would be between –80 and –120.
2.
Signal Quality
The numerical equivalent of the RECV display .
Normally between 5-8 when receiving a good signal.
3.
Frequency
The actual frequency tracked by the receiver.
4.
Service ID
The service identifier on the received signal. For
most Fugro Uplink’s this will be xC685.
5.
Date / Time
The current UTC time and date. Once a Fugro uplink
is being tracked.
User Settings
1.
Command Rate
Baud rate setting for the command port.
2.
Data Rate
Baud rate setting of the data port. Output to external
equipment.
3.
Aux Rate
Baud rate setting of the Auxiliary port. Input/output to
external GPS Receivers.
4.
Detector Mode
Normally set to VBS. VBS mode allows the
receiver to generate RTCM 104 Corrections based on the location
of the receiver .
5.
Contrast
Adjust the contrast level.
6.
RTCM
Used to add CR (Carriage Return) and LF (Line Feed) to
the RTCM string. Not used when in VBS mode.
7.
Reac Delay
Adjusts the time taken for the receiver to wait before
it tries to reacquire the signal .Can be NONE,SHORT,MEDIUM or
LONG . Normally set to MEDIUM.
8.
Data Port
Allows the output from the data port to be selected .
About
1.
Serial Number
Displays the unit serial number
2.
Group Number
Displays the unit group number
3.
Main Software
Displays the current main software version.
4.
DSP Version
Displays the current DSP software.