C-4
© 2017 SeaStar Solutions
i7700 Installation Supplement, Rev. B
What this means is that the parameters you see are just a snapshot
of what is in the device. If you edit these parameters on screen,
the changes exist only in Datalink. They will not exist in the device
until you click the
Write
button on the toolbar.
Write
takes all the
database values that exist in Datalink and copies them to the
device, where they are saved in nonvolatile memory (i.e. memory
that is not lost when power is removed).
Similarly, clicking
Read
will copy parameters from the connected
device into the Datalink database, allowing you to see the current
state of the actual device. This is a good way to check that any
changes you make have been correctly copied to the device.
For this reason, you will generally not need to use the
Open
and
Save
buttons on the toolbar. They have a different function in
the context of Datalink, and aren’t used for editing parameters.
Likewise, if you are prompted to save changes when you close an
Interface, just click
No
and exit. The save function has nothing to do
with whether the changes are saved on your device.
