Kicker Cable Tiebar
7
HYDRAULIC STEERING
KICKER CABLE TIEBAR
Figure 9.
STEP 7:
Support Bracket/Sub-
Assembly Final Install
• Using a good quality marine grease, lubricate the telescoping,
5/16" cable rod.
• Using a 7/8" open ended wrench, and a 7/8" deep socket, tighten
support bracket nuts and torque to 50 ft-lb (see figure 9 for
placement of wrench and socket).
NOTE:
cable may need to be retracted to allow the socket to reach
the threads of the nut.
• Using a 5/8" socket, tighten and torque 5/8" cylinder shaft nuts
to 33 ft-lb.
7/8"
50 ft-lb
5/8"
5/8"
7/8"
33 ft-lb
33 ft-lb
GOOD QUALITY
MARINE GREASE
CAUTION
Failure to grease cable rod may
result in premature wear, leading
to irreparable damage.
