| 008 Sears CA Treadmill Service Manual [rev 1.0]
Section Two |
Voltage Checks
V DC
GND
GND
UP
Dow
Mo
P
VD
M
To check the voltage of a specific function (i.e. elevation, motor control, etc), place the negative lead of
your multi-meter on pin B3, B4 or B5, and place the positive lead on the desired pin. Follow the voltage
charts on p23 (9wire) and p24 (12wire).
Note | 1: Wire colors are subject to change.
>>
Console Cable Voltage Check
Note | 2: It may be necessary to remove the glue from the console cable to access the pins.
>>
Speaker Amp Board Voltage | 30727 Only
JOHNSON
Acepo
wer
CON2
D12
Voltage In
Voltage Out
120v
12v
