5
R-1 AGGREGATE CHIP SPREADER
MODEL R-1
When you receive your
MODEL R-1
from the factory, it may be packed in many
different ways. This is due to the rules of different Common Carriers. In general,
this manual will try to explain how to set up your machine, from the shipping skid,
lubricate, operate, maintain, and store it.
SET UP
Remove the spreader from the shipping skid, after inspecting it for any bent,
damaged, or broken parts. Should there be any damage in shipping, consult the
carrier who delivered the machine. Unpack all unattached parts. These parts may
be attached to the inside of the hopper, to the skid, in the built-in tool box.
Lay out all parts and check the parts section of this manual for identification.
Check the operation of the shift lever. The spreader may have to be moved
slightly to obtain full throw on the shifting lever. Check the feed gate operation.
Check the operation of the agitator clutch if spreader is so equipped.
