Sealite SL-300-2D5 Series Installation & Service Manual Download Page 15

Page: 15 / 52

SL-300-2D5 Series

13-19NM Marine Lanterns

Latest products and information available at

www.sealite.com

Provides a summary of the lantern configuration settings, hardware and software versions, and event log.

Version

Is an information panel that identifies the Lantern’s internal electronic hardware and firmware versions.

Lantern Summary

Is an information panel that displays a summary of the key lantern settings: colour, operation mode, Peak

Intensity setting, Advance Operational Mode, Flash Code, Flash Sync offset and Intensity setting. Refer to

the Information, Operation Mode Flash Code, and Intensity Tabs for a description of these parameters.

Name

A user defined name, comprising alphanumeric characters (and -, $, #,@) can be typed into dialogue box

and by pressing and stored within the lantern’s non-volatile memory by pressing the ‘Write Name’ button.

LED Colour

A generic picture of the lantern model and colour that the software tool is communicating with is displayed

in this panel.

Event Log

Displays the alarm events recorded by the lantern firmware. Possible alarms (flat battery, low battery, LED

failure, high temperature). All alarm events are recorded irrespective of whether the lantern has been

configured to respond to an alarm.

Info Tab

Summary of Contents for SL-300-2D5 Series





















































Search results

Summary of Contents for SL-300-2D5 Series

Reviews:

Related manuals for SL-300-2D5 Series

Brands by name

Popular brands

Sealite SL-300-2D5 Series, Installation & Service Manual

Search results

Summary of Contents for SL-300-2D5 Series

Reviews:

Related manuals for SL-300-2D5 Series

Brands by name

Popular brands