Sealite SL-300-2D5 Series Installation & Service Manual Download Page 17 | Manualshive

Page: 17 / 52

background image

SL-300-2D5 Series

13-19NM Marine Lanterns

Latest products and information available at

www.sealite.com

17

Marine Characteristic Selection

The flash character is defined by first selecting the Mariner code, then the Flash code name and finally

timing.

Sealite Code Selection

This is an alternative method to select the lantern flash code by using either the Sealite IR remote

control numerical figure or if known the Sealite rotary switch flash character. Refer to the IR remote

control section for valid flash characters.

Sync Offset

This panel is used to set a fixed delay to the commencement of the flash character. The built-in

GPS receiver and advanced software of the Sealite synchronised lanterns allow for the adoption of

SeaFlare™ channel marking – a unique system that cascades the flash synchronisation of channel

lanterns in a uni- or bi-directional flash pattern. By default this figure is set to zero.

Manual Entry Custom Flash Character

In this panel one, custom flash characteristics can be defined with up to 10 individual on/off times.

Flash Code

«
...
15
16
17
18
19
...
»

Summary of Contents for SL-300-2D5 Series





















































Reviews:

No comments

Related manuals for SL-300-2D5 Series

Brand: Japan Radio Co. Pages: 20

Brand: TaoTronics Pages: 2

VEX-WPCR Series

Brand: Exitronix Pages: 4

Brand: Lupine Pages: 7

Brand: Exo Terra Pages: 11

Brand: GE Pages: 2

Brand: Patlite Pages: 2

Brand: IKEA Pages: 8

MODMASTER MULTI-FABRIC SOFTBOX

Brand: Savage Pages: 2

FUSION GPL FN-0120

Brand: Feniex Pages: 5

Brand: Vari Lite Pages: 2

Brand: Sagitter Pages: 28

ColorSplash XG LPL-F2C Series

Brand: J&J Electronics Pages: 17

Brand: Acclaim Lighting Pages: 6

Brand: Romo Pages: 120

Brand: American Lighting Pages: 2

Brand: American DJ Pages: 4

Brand: luceco Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands