22
8. Insert the phone into the housing, close the waterproof door and rotate the cam lock clockwise until it stops
and locks in place. Make sure not to trap anything in the sealing area when closing the waterproof door.
Note
•
Do not touch the gold water sensor located on the inside bottom right of the housing. That will cause the
Leak Alarm to activate and display a “Leak Detected” message. If that happens, power the housing Off
and repeat steps 6 through 8.
•
It is normal for there to be a small gap between the waterproof door and the front housing after the door is
closed. Applying vacuum pressure in step 10 will close the gap.
