14
6. Ten medium-sized rubber grip tabs (A) have
been pre-installed into the housing as shown
below. The rubber grip tabs and bow-shaped
spring hold the phone in position and prevents
the phone from moving around when the
housing is sealed.
Two of the slots don’t have grip tabs installed to
avoid contacting the iPhone’s side buttons. Do
not install grip tabs in areas where the phone’s
side buttons are located.
Exchange the medium-sized grip tabs with
small or large-sized tabs depending on your
specific iPhone model – see the size chart
below. The grip tab end is tapered. Make sure
to install the grip tabs with the longer side up
and shorter side down, which keeps the phone
held down.
Rubber grip tabs
pre-installed medium-sized rubber grip tabs (A)
Grip tab size chart
