VS8700 - 1 - 110108
16
The control module number, sequence of the DTC’s, total
number of codes detected and type of codes (Generic or
Manufacturer specific, Stored or Pending codes) will be
observed on the upper right hand corner of the display.
3)
If more than one DTC is found, use
SCROLL
button, as
necessary, until all the codes have been shown up.
If no codes are detected, a “
No codes are stored in the
module!
” message displays on the screen.
If retrieved DTC’s contain any manufacturer specific or
enhanced codes, the display indicates “
Manufacturer
control
”.
4) Press
ENTER/EXIT
button to
return to previous menu.
4.2 Erasing Codes
U
CAUTION:
U
Erasing the Diagnostic Trouble Codes may allow the
code reader to delete not only the codes from the vehicle’s on-board
computer, but also “Freeze Frame” data and manufacturer
enhanced data. Further, the I/M Readiness Monitor Status for all
vehicle monitors is reset to Not Ready or Not Complete status. Do not
erase the codes before the system has been checked completely by a
technician.
$11 Pd 1/6
P0115
Generic
Engine Coolant Temperature
Sensor 1 Circuit
$09 4/6
P1324
Other
Manufacturer control
