3) If you do not want to proceed with erasing the codes, press the
N
button to exit. A message of
“command cancelled”
will show up.
4) If you do wish to proceed to erase the codes, then press the
Y
button.
5) If the codes are cleared successfully, an “
ERASE DONE!
”
confirmation message will show on the display. Press any button
to return
to the previous menus.
6) If the codes are not cleared, then an “
ERASE FAILURE!
”
message will appear. Press the
N
button to return to previous
menus.
Viewing ECU Information
1) To
view
ECU Information
, use the
UP/DOWN
scroll buttons
to select
ECU
Information
from
Select Function
menu and
press the
Y
button.
Erase Codes
Erase Trouble Codes!
Are you sure?
<YES> NO
Select Function
1) Read Code
2) Erase Code
►
3) ECU Information
4) Readiness Test
●
If the scan tool is not connected or no communication is
established with the vehicle yet, then refer to
Reading Codes
from 1 to 7 at Paragraph 3.1.
< V2.6 USB-V1.9 SERIAL SOFTWARE
V
14
< V2.6 USB-V1.9 SERIAL SOFTWARE
14
