Erasing Codes
CAUTION: Erasing the Diagnostic Trouble Codes may allow the
scan tool to delete not only the codes from the vehicle’s on-board
computer, but also “Freeze Frame” data and manufacturer specific
enhanced data. Further, the I/M Readiness Monitor Status for all
vehicle monitors is reset to Fail status. Do not erase the codes before
the system has been checked completely by a technician.
16627 --100 01/10
CAN BUS
↓
Solenoid Valve (A)
For Boost Pressure
Control (N75):
Malfunction: P0243
1) If you decide to erase the DTCs, use the
UP/DOWN
scroll
buttons to select
Erase Codes
from
Select Function
menu and
press the
Y
button.
Select Function
1) Read Codes
►
2) Erase Codes
3) ECU Information
4) Readiness Test
If the scan tool is not connected or no communication is
established with the vehicle yet, then refer to
Reading Codes
from 1 to 7 at Paragraph 3.1.
2) A warning message comes up asking for your confirmation.
< V2.6 USB-V1.9 SERIAL SOFTWARE
V
13
< V2.6 USB-V1.9 SERIAL SOFTWARE
13
