3.2.
Display (Fig 2)
The lCd displays the
measured values obtained in
tests and various other
information regarding the
state/operation of the meter.
The following is an illustration
and descriptive list to enable
the user to understand the
information presented.
Battery is low.
Replace immediately using a PP3 9V
battery. Failure to do so could lead to
inaccurate readings.
Indicates an AC voltage or current.
The displayed value is the mean value
Indicates a negative reading
diode test
Continuity buzzer is on
data hold function is active
Indicates the requirement for test leads
to be connected.
Ω
: Ohm. The unit of resistance.
k
Ω:
kilohm. 1x103 or 1000 ohms.
M
Ω:
Megaohm. 1x106 or
1,000,000 ohms.
V: Volts. The unit of voltage.
mV: Millivolt. 1x10-3 or 0.001 volts
A: Amperes (amps). The unit of
current.
mA: Milliamp. 1x10-3 or 0.001 amperes
Test of dwell.
Tach x 10
Number of cylinders
Fig 2
Caution - high voltage testing
TA200 Issue No: 3 - 19/12/11
Original Language Version
