Sealey SM1300, Quick Start Manual

Page: 2 / 5

1.3. lead paint Warning!
Paint once contained lead as a traditional ingredient. Contact with the dust from the removal of such paint is toxic and must therefore be
avoided. The following action must be taken before using the sander on a surface that you suspect may contain lead paint.
1. User must determine potential hazard relating to age of paint to be removed (modern paints do not have lead content).
2. danger! Keep all persons and pets away from the work area.
3. We recommend personal protection by using the following safety items:
a) Paint Spray Respirator (Our ref SSP16EN)
b) PE Coated Hooded Coverall (Our ref SSP266).
c) latex Gloves (our ref SSP24).
4. Take adequate measures to contain the paint dust, flakes and scrapings.
5. Continue to wear safety equipment as in (3) above and thoroughly clean all areas when task is complete. Ensure paint waste is disposed
of, in sealed bags or containers, according to local regulations.
2. intrOductiOn
oscillating belt and bobbin sander with dust extraction port. The oscillation allows faster sanding and prevents burning of the workpiece.
Features a tilting front table up to 48° for bevel sanding and has indents at popular angles 0°, 15°, 22.5°, 30° & 45°. For convenience all sanding
parts and accessories have allocated slots in the housing for storage when not in use. easily change the belt sander to a bobbin sander or vice
versa with the supplied wrench. Supplied with 4” x 24” belt and the following bobbin sanders: 1/2”, 3/4”, 1”, 1-1/2”, 2”.
3. specificatiOn
Model no: ..................................................................SM1300
Motor Power: ..................................................... 450W - 230V
n o Load Speed (Spindle/Belt): ........................ 2000/1750rpm
oscillations: ................................................................. 60opm
B elt Size: ........................................................... 610 x 102mm
Spindle Height: ........................................................... 102mm
Table Tilt: ....................................................................... 0-48°
Table Size: ........................................................ 489 x 483mm
B obbins Included:................................. 13, 19, 25, 38, 50mm
d ust Extraction Port ID/OD ................................ Ø36/Ø39mm
W eight: ........................................................................... 18kg
S M1300 Issue 2 (HF) 24/05/18 Original Language Version
© Jack Sealey limited