![background image](http://html.mh-extra.com/html/sealey/crm1201/crm1201_instructions_1227652002.webp)
3. TECHNICAL SpECIFICATIONS
5.1.
OpERATING THE CABLE REEL.
5.1.1. Before using the lamp the reel should be plugged into the mains socket.
5.1.2. Detach the lamp from the stowage eye on the reel and begin to pull the cable out to the desired length/location. As you do so you will
hear the ratchet operating at regular intervals. When sufficient cable has been pulled out, release the tension, at which point the
ratchet will operate to lock the cable.
WARNING!
If the cable is released when the ratchet is silent, the cable will not lock.
5.1.3. switch the lamp on using the switch on the handle and position the lamp to give the best light for the job in hand.
5.1.4. to retract the cable, pull and release it when the ratchet is silent. Do not let go of the lamp but allow the cable to retract slowly. stow
the lamp by attaching it to the eyelet on the casing.
5.1.5. switch the power off using the on/off switch on the reel. If the lamp is not to be used for some time unplug it from the mains.
WARNING!
The reel tension is factory set, if any adjustment is required contact an authorised service agent. dO NOT remove
any of the screws on the black spring cover.
5.2.
THERmAL CUT-OUT.
5.2.1. In the event of the reel being overloaded the cut-out will trip. If this occurs disconnect reel from the 230V supply and then determine
and rectify the cause of the overload.
5.2.2. reconnect to the power supply and the unit will automatically reset when it has cooled.
5. OpERATION
4. mOUNTING
Model no:
....................... CRm1201 ..................................... CRm1202.V2 .........................................CRm1203 .................................... CRm1204
Input:....................................... 230V ...................................................230V .................................................230V ............................................ 230V
output: ...................................... 12V .....................................................12V ...................................................12V .............................................. 12V
Power: ..................................... 24W ......................................................3W .................................................1.7W ............................................. 60W
cable Length: ...........................15m ....................................................15m ..................................................15m ..............................................15m
4.1.
the reel requires a mains socket to be no further away than 450mm.
4.1.1. Wall mount the reel using the bracket provided. Ensure that the wall, the mounting surface and the mounting screws and plugs will
adequately support the weight of the reel, and the tension of the cable as it is pulled out.
4.1.2. Ensure that the cable can be pulled out to, and reeled back from work sites without rubbing on the sides of the cable entry.
4.1.3. If required the lamp can be stowed by attaching it to the eyelet adjacent to the cable outlet.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
ImpORTANT:
no liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORmATION:
for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK distributor, Sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. Edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
Original Language Version
crM1201,1202.V2,1203,1204 Issue no.3 18/03/11
parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or phone 01284 757500.