Sealer Sales CBS-880 I, Instruction Manual

Page: 8 / 45

C B S - 8 8 0 I N S T R U C T I O N M A N U A L
4
How Does the CBS-880 Work?
CBS-880 is comprised of a stainless steel frame, speed adjusting mechanism, sealing
temperature control system and transmission system. Turning on the heat for the
band sealer will cause a rapid rise in the temperature of the heating blocks. Required
temperature and speed can be adjusted via the temperature controller and speed adjusting device. Plastic
material to be sealed is placed on the guide and conveyor. Conveyor will then take the material between the
two heating blocks to fuse the material together. Material will then pass through the cooling blocks to allow
the material to congeal. Finally, material will then pass through the embossing wheel for a meshed seal line.
The motor drives the sealing belts, drive belts and conveyor simultaneously.
Specifications
CBS-880I (Horizontal) CBS-880II (Vertical)
Power 110V/60Hz
Motor Power 50W
Sealing Speed 0-472 inches/minutes
Sealing Width 8mm (Optional 15mm width available)
Temperature Range 0-300˚C (572˚F)
Conveyor Size 38” x 7”
Max Conveyor Load 6.6lbs
Min/Max Height of Bag
(Vertical Only)
N/A 6” / 12”
Character Size 3x4x9mm / 18PT
Embossing (Optional Feature) 1 line embossing (2 lines available)
3 sections w/ 15 characters/line
Dimensions 33” x 17” x 13” 33” x 17” x 22”
Weight 60lbs 66lbs
CBS-880 Diagram
Figure 1. Horizontal Band Sealer (1) Guide, (2) Driven Wheel Seat (Adjusting Block), (3) Driven Wheel, (4) Control Panel, (5) Heating Block, (6) Holding Plate, (7)
Pinch Roller, (8) Cooling Block, (9) Driving Wheel, (10) Embossing Roller, (11) Silicone Wheel, (12) Guiding Wheel, (13) Conveyor Belt, (14) Conveyor Table, (15)
Fastening Knob for Elevating Table, (16) Transverse Tightening Knob for Conveyor Table, (17) Conveyor Support
Basic Principles
CBS-880 is easy to use. To
seal, adjust temperature and
place bag on conveyor