Sealer Sales CBS-880 I, Instruction Manual

Page: 15 / 45

C B S - 8 8 0 I N S T R U C T I O N M A N U A L
11
Operation
Figure 9. Control Panel of CBS-880
1. Switch the circuit breaker (Figure 44 , Item #7) to the "On" position.
2. Turn Power, Heater, and Fan switches to the “On” position. Belts and conveyor will begin to move
simultaneously.
3. Emergency Stop – Press the emergency stop to turn off the machine. In order to restart the
machine, you must release the emergency stop by turning the knob 120˚ clockwise.
4. Adjust the conveyor speed.
5. Adjust the temperature controller to the temperature desired to seal your material. Temperature
settings will vary based on bag material and thickness. If you are unsure what temperature setting to
use, we recommend starting at a low temperature and gradually increase to a temperature that will
seal your material. The PV value (red light) is the actual temperature and the SV value (green light) is
the desired temperature setting.
Figure 10. CBS-880 Temperature Controller
a. To set the temperature, press the SET button.
b. Press the <AT (auto tuning) button to move from the ones, tens, and hundreds place.
Adjust the value using the up and down arrows.
c. Press the SET button to save the temperature settings. Your desired temperature settings
should appear in green in the SV Value.