Seagull RANS S-20 RAVEN-20cc, Assembly Manual

Page: 7 / 40

7
Epoxy.
Aileron control horn.
INSTALL FLAP CONTROL HORN.
Install the flap control horn using the
same method as same as the aileron con-
trol horns.
Epoxy.
Flap control horn.
INSTALLING THE AILERON SERVOS.
.
.
Because the size of servos differ, you
may need to adjust the size of the precut
opening in the mount. The notch in the
sides of the mount allow the servo lead to
pass through.
1) Place the servo between the mounting
blocks and space it from the hatch. Use a
pencil to mark the mounting hole loca-
tions on the blocks.
2) Use drill bit in a pin vise to drill the
mouting holes in the blocks.
Fiberglass control horn