Seagull RANS S-20 RAVEN-20cc, Assembly Manual

Page: 15 / 40

15
Vent tube.
Fuel pick up tube.
Fuel fill tube.
ENGINE MOUNT INSTALLATION.
1) Locate the items necessary to install
the engine mount included with your
model.
.
4x30mm
2) Use four 4x30mm head bolts and four
4mm washers to attach the engine mount
rails to the firewall. Tighten the screws .
Make sure to use threadlock on the screws to
help prevent them from vibrating loose.
Thread locker glue.
MOUNTING THE ENGINE.
1) Position the engine with the drive
washer (145mm) forward of the firewall
as shown.
2) Use a pin drill and 4mm drill bit to
drill a small indentation in the mount for
the engine mounting screw.
4mm
145mm
4mm
3) Use a drill to drill the four holes in the
engine mount rails.