23
The propeller should not touch any
part of the spinner cone. If it does, use a
sharp modeling knife and carefully trim
away the spinner cone where the propel-
ler comes in contact with it.
INSTALLING BATTERY - RECEIVER.
1) Plug the servos leads and the switch
lead into the receiver. Plug the battery
pack lead into the switch also.
2) Wrap the receiver and battery pack in
the protective foam rubber to protect
them from vibration.
Receiver.
Battery.
.
INSTALLATION PILOT AND
WINDSHIELD.
1) Locate items necessary to install pilot
and windshield.
2) A scale pilot is included with this ARF.
The Pilot included fits well in the cockpit.
(or you can order others scale pilot fig-
ures made by SG Models. They are avail-
able at SG Models distributors.).
If you are going to install a pilot figure,
please use a sanding bar to sand the base
of the figure so that it is flat.
Epoxy.
