RACER DELTA 40-46
Instruction Manual.
18
Reinstall the servo horn by sliding the
connector over the pushrod wire. Cent-
er the throttle stick and trim and install
the servo horn perpendiular to the servo
center line.
Move the throttle stick to the closed po-
sition and move the carburetor to closed.
Use a 2.5mm hex wrench to tighten the
screw that secures the throttle pushrod
wire. Make sure to use threadlock on the
screw so it does not vibrate loose.
COWLING.
Carefully trim the cowling to fit over the
engine. Use the photo here and those on
the box as a guide. The photo shows the
completed engine installation as a refer-
ence for all the trimming necessary to fit
the cowl over the engine.
