RACER DELTA 40-46
Instruction Manual.
14
Use a felt tip pen to mark the wire where
it crosses the hole. Use a pair of pliers to
put a shrp 90-degree bend in the wire at
the mark.
Repeat this procedure to mount the servo in
the other panel.
INSTALLING THE STOPPER
ASSEMBLY.
1) Using a modeling knife, carefully cut
off the rear portion of one of the 3 nylon
tubes leaving 1/2” protruding from the
rear of the stopper. This will be the fuel
pick up tube.
13.5mm
M3 clevis.
M3 lock nut.
15.5mm
