15
www.seagullmodels.com
INSTALLING THE FUSELAGE SERVOS.
1) Install the rubber grommets and brass
collets onto the throttle servo. Test fit the servo
into the aileron servo mount.
2) Secure the servos with the screws pro-
vided with your radio system.
Because the size of servos differ, you
may need to adjust the size of the precut open-
ing in the mount. The notch in the sides of the
mount allow the servo lead to pass through.
Switch.
Trim and cut.
3/ 32” Hole.
INSTALLING THE SWITCH.
MOUNTING THE ENGINE.
Install the switch into the precut hole in the
side, in the fuselage.
1) Position the engine with the drive washer
(150mm) forward of the firewall as shown.
Rudder servo.
Elevator servo.
Throttle servo.
THROTTLE SERVO ARM INSTALLATION.
Adjustable Servo
connector.
Servo arm.
Loctite secure.
1 PCS.
Throttle servo arm.
Elevator servo .
Rudder servo .
Install adjustable servo connector in the servo
arm as same as picture below:
+ ENGINE 0.91 : 2 STROKE.
