WWW.SEAGULLMODELS.COM
25
Insert wing gun onto the wings.
3) With the model inverted, place your
fingers on the masking tape and carefully
lift the plane.
2) Mount the wing to the fuselage. Using
a couple of pieces of masking tape, place
them on the top of the wing
100mm
back
from the leading edge of the wing at the
wing root.
BALANCING.
1) It is critical that your airplane be
balanced correctly. Improper balance will
cause your plane to lose control and
crash. THE CENTER OF GRAV-
ITY IS LOCATED
100MM
BACK
FROM THE LEADING EDGE OF
THE WING AT THE WING ROOT.
Summary of Contents for CURTISS P-40N WARHAWK
