Seagull Models BEAVER TURBIN, Assembly Manual

Page: 6 / 43

Beaver Turbin Instruction Manual.
6
INSTALLING THE AILERON SERVOS.
Because the size of servos differ, you
may need to adjust the size of the precut
opening in the mount. The notch in the
sides of the mount allow the servo lead to
pass through.
2) Tape the servo lead to the wing to pre-
vent it from falling back into the wing
1) Attach servo lead to the aileron servo.
Attach the string to the servo lead and
carefully thread it though the wing. Once
you have thread the lead throught the
wing, remove the string so it can use for
the other servo lead.
3) Set the aileron servo in place and use a
Phillips screw driver to install it with four
wood screws.