background image

36

DAT Autoloader Installation Manual

 

7. Technical support

If you experience problems installing or using your DAT drive,
contact one of the technical support services listed below.

SeaFONE

1-800-SEAGATE (1-800-732-4283)

International customers please call 408-456-4496.

SeaNET: 

Seagate’s World Wide Web home page—
http://www.seagate.com

Seagate CompuServe Forum: Online technical support for Seagate products

on CompuServe. Type go Seagate.

SeaBOARD: Seagate’s automated computer bulletin board system, available

24 hours daily. Set your modem to 9,600 baud, eight data bits, no
parity and one stop bit (8-N-1).

Australia

61-2-9756-2359

England

44-1628-478011

France

33 1-48 25 35 95

Germany

49-89-140-9331

Taiwan

886-2-719-6075

USA

405-936-1630

Thailand

662-531-8111

SeaFAX: 

You can use a touch-tone telephone to access Seagate’s
automated FAX system to receive technical support information by
return FAX. This service is available 24 hours daily.

Australia

61-2-9756-5170

England

44-1628-894084

USA

   

405-936-1640

Seagate Technical Support FAX: You can FAX questions or comments to

technical support specialists 24 hours daily. Responses are sent
during local business hours.

Australia

61-2-9725-4052

England

44-1628-890660

France

33 1-46 04 42 50

Germany

49-89-1430-5100

Hong Kong

852-2368 7173

Japan

81-3-5462-2979

Korea

82-2-556-7294/4251

Singapore

65-488-7528

Taiwan

886-2-715-2923

USA

405-936-1683

Seagate e-mail Technical Support: You can e-mail questions or comments to:

[email protected]

Summary of Contents for Scorpion 96













































Reviews: