DAT Autoloader Installation Manual
7
Changing the default settings
To change one or more of the default settings (including SCSI ID
or SCSI termination), you will need to use one of the following:
External dip-switches located on a cutout on the top of
the drive:
•
SCSI ID
•
MRS checking
•
Parity checking
•
Data compression
•
Power-on self-test enable
Jumpers on the back of the drive:
•
SCSI termination
•
Terminator power
•
Remote SCSI address selection
Internal dip switches located on the autoloader drawer:
•
Autoload first tape
•
Display orientation
•
Display language
•
Display intensity
➤
Note. Whenever possible, power down the drive before
changing jumpers or dip switches. Your changes will take
effect when the drive is subsequently powered on.
Summary of Contents for Scorpion 96
Page 2: ...Scorpion 96 DAT Autoloader Installation Manual...
Page 7: ......
