manualshive.com logo in svg

Seagate OneStor SP-3584, Installation & User Manual

Share
Download
Seagate OneStor SP-3584 Installation & User Manual Download Page 70

OneStor® SP-3584 Installation & User Guide

62

B.1.3 Harmonics

EMC harmonics are in accordance with EN 61000-3-2:2014.

B.1.4 Flicker

EMC flicker is in accordance with EN 61000-3-3:2013.

B.1.5 Immunity Limit levels

EMC Immunity is in accordance with European standard EN55024:2010/CISPR24:2010.

B.2 Safety

OneStor SP-3584 is approved as safe for use in the following territories:

• Canada.
• European Union.
• United States of America.

Product Type Safety approval: UL, cUL, and CE.

The enclosure meets the requirements of the latest applicable editions of the following standards:

• EN 60950-1.
• IEC 60950-1.
• UL 60950-1.
• CAN/CSA-C22.2 No. 60950-1-07.

A CB report to the latest applicable edition of standard IEC 60950-1 is available for the power and 
cooling module and product type. The CB report has also been written with consideration to the latest 
applicable edition of the standard EN 60950-1, and includes the national differences for all countries in 
the CB scheme.

CCC applies to power and cooling modules only as FRUs.

 The OneStor SP-3584 enclosure meets the fire enclosure standards set out in the latest applicable edition 
of the UL 60950-1.

B.3 Environmental and Recycling

B.3.1 RoHS and JIG A

The OneStor SP-3584 is manufactured from RoHS compliant materials and components, in accordance 
with EU Directives 2002/95/EC and 2011/65/EU. 

Summary of Contents for OneStor SP-3584















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands