SD-MA-025
39
Click to select a screen, and then drag, select the screens to merge, right-click, and then click Screen
Splicing to merging;
Select the screen, which is merged, right click, then following menu will show as on the
picture below:
Cancel Splicing: Cancel splicing;
Input Select: Select the input port, for the display to display (Input 1 ~ Input 8);
Output Select: Set the output port that connect to the display, need according to the
Video wall system setup status to set (Output 1 ~ Output 8); It means which output
port connect to the display;
Output Type: Set the terminal type of the output port, need to set according to the
Video wall system setup status; (When in merging mode, can only support HDMI)
Output Format: Set the output port output resolution; (When in merging mode, can
only support 1080P 60HZ)
Horizontal adjust: Set the Video wall screen horizontal frame width for each screen;
Vertical adjust: Set the Video wall screen vertical frame width for each screen;
Sync lock: In order that all the screens merged are sync lock all the time, must set the
sync lock;
b
