SD-MA-025
32
2.
Read the input signal resolution of all the input ports;
3.
Read and set all the input boards ‘output resolution; The default output resolution is 108
0p 60HZ;
Note
: If no special need, please don’t change the input board’s output resoluti
on, otherwise will
affect the effect of seamless switching;
4.
Read the output board’s input resolution;
5.
Read and set the output’s output type; user must set the output te
rminal type according to the type
of terminal that connected to the display device: HDMI/DVI/VGA/YPbPr/CVBS
Note: Only the DVI-
U output board has this setting, SDI/HDBaseT/ fibre and other output boards, this setting is
invalid.
6.
Read and set the output board’s output resolution;
4.8
PQ & Position
User can read and set the brightness/contrast/saturation/sharpness of the input board & output
board, also can read and set the video display position of the input board & output board;
NOTE
：
If not needed, do not change the default settings; if there is a problem after the change, click Reset to
return to the factory settings;
