SD-MA-025
22
NOTE:
A.
If the IP type of the device is Dynamic (DHCP) mode, the network router or switch must support
HDCP function, otherwise the device will not be able to obtain a valid IP address, and this will
cause device not to be found.
B.
If the device can be found but not able to connect successfully, please make sure the IP address
of the PC and the device are in a same network segment.
（
e.g. when subnet mask is
255.255.255.0
，
then 192.168.0.2 and 192.168.0.3 are in a same network segment
）
The UI after connected successfully will be as follows:
