Seabreeze PTAC09CH3ZX, Installation And Operation Manual

Page: 13 / 27

950-0094-revA - 13 - 26 February, 2008
Troubleshooting
SYMPTOM Possible Causes
Unit does not work in any mode Is the power plug inserted into the socket?
Is the fuse blown or circuit breaker tripped?
Is the ambient temperature below 61ºF?
•
The auto protection function of the air conditioner will prevent the
unit from cooling operation below 61ºF.
There is insufficient cooling or
heating Is the room temperature set properly?
Is the air filter screen clean and not blocked?
Are doors and windows open”
Is the room directly exposed to sunlight?
Are there heat sources inside the room?
Fuse or circuit breaker
frequently trips Call an authorized service technician.
The power cord becomes
abnormally hot Call an authorized service technician
The insulation of the power cord
is cut/frayed/broken Call an authorized service technician
There are abnormal noises when
the unit is operating Call an authorized service technician
The control panel buttons do not
work Is the control panel locked?
•
Press both the WARM(ER) and COOL(ER) BUTTONS to
lock/unlock the control panel
WALL SLEEVE INSTALLATION
To ensure the best performance of the packaged terminal air conditioner, please observe
the following wall sleeve installation procedures and do the installation in accordance with
related requirements.
1. Wall sleeve assembly
•
Unpack all parts and accessories, referring to Fig. 1, assemble the wall sleeve by
first “clip-locking” the side pieces to the bottom piece, then the top piece to the
assembled side and top pieces.
•
Handle the wall sleeve carefully.
•
If the wall sleeve is deformed, chassis installation may be hindered. If the wall
sleeve has become deformed, straighten it before installing it in the wall.