/SEABEAR H3 on the surface
36
SEABEAR H3
fly indicator is green, thus according to the algorithm in the
SEABEAR H3, it is possible to fly.
Example 3 of the surface screen shows that the diver is at 500m
altitude. In this example, the SEABER H3 is switched to Apnea
or Bottom timer mode. In these mode a conservatism setting
does not make sense, thus instead of GF data, the surface
interval is shown. The surface interval is the elapsed time on the
surface after end of the last dive. The surface interval in that
example is 2h and 3 min. The remaining battery capacity is less
than 30%, thus the SEABEAR H3 should be charged before the
next dive.
When the SEABEAR H3 is charged via a USB cable, then the
battery symbol shows a bold arrow.
This example also shows how the SEABEAR H3 can be
customized. SEABEAR H3 Diver data is stored in a file on the
internal memory.
