manualshive.com logo in svg

Seabear H3, User Manual

Share
Download
Seabear H3 User Manual Download Page 91

 

 

Troubleshooting

 

91

SEABEAR H3 

13

 

Troubleshooting 

Problem: The SEABEAR H3 does not switch on 

Charge the SEABEAR H3 for at least 2h. If the SEABEAR H3 is completely discharged, it 
loses all decompression information and is reset to default settings. It should restart shortly 
after the charging has started. 

 

Problem: The SEABEAR H3 is connected to a USB charger but does not charge 

Check the cable and the connector pins for corrosion and dirt. Clean if possible.  

 

Problem: The SEABEAR H3 is outside the water, but it is in dive mode and the displayed 
depth is greater than 0.5m.  

This can happen when the SEABEAR H3 was exposed to a sudden drop of atmospheric 
pressure. In this case it is necessary to reset the SEABEAR H3. Simply attach the USB 
cable to the SEABEAR H3 and plug it in a charger. The SEABEAR H3 will be reset after a 
few seconds. All decompression information and user settings are lost after a reset.  

Summary of Contents for H3

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands